Expert Service and Pure Precision

Calibration is one of the most important quality-relevant processes in the field of measurement technologies. It is the only way to validate measuring instruments in accordance with the regulations set by the industry.

Calibration according to DIN EN ISO/IEC 17025 may only be performed by test laboratories certified by the German Accreditation authority. The DIN EN ISO/IEC 17025 standard requires traceability to native standards and the measured value display is compared with the respective standard. The certified calibration of test and measurement equipment and its traceability is a reliable recording of the test equipment. As an accredited calibration laboratory, mg-sensor can thus ensure the quality of your products. 

As an accredited laboratory, we offer you the measured variables force and moment, torque, angular velocity, acceleration shock and sine, length, angle of rotation, temperature, relative humidity, voltage, and current as standard calibration according to DIN EN ISO/IEC 17025. 

Depending on the required calibration type, standard calibration, as cited by DIN EN ISO/IEC 17025, we will issue the respective calibration certificate. All test results of the calibration process are recorded in the corresponding calibration certificate. 

DIN EN ISO/IEC 17025Measured VariablesStandard Calibration
0.5 – 25 kN Force (Seat Belt) 0.5 – 25 kN
2 – 20 kN Force (Sensors) 2 – 20 kN
0.05 – < 0.5 kN 0.5 – 25 kN Multi-Component Force (ATD) 0.05 – < 0.5 kN 0.5 – 25 kN
0.05 – 600 kN Force (Transducer) 0.05 – 600 kN
3 – 1,200 Nm Multi-Component Moment (ATD) 3 – 1,200 Nm
8 – 5,000 °/s Angular Velocity 8 – 5,000 °/s
200 - 20.000 m/s² Acceleration Shock 200 - 20.000 m/s²
5 - 200 m/s² (10 Hz - 10 kHz) Acceleration Sine 5 - 200 m/s² (10 Hz - 10 kHz)
0 - 200 mm Length0 - 500 mm
0 - 360° Rotation Angle 0 - 360°
-90° - 90°Tilt -90° - 90°
10 - 50 °C Temperature 10 - 50 °C
-50 - 500 °CTemperature Modules -50 - 500 °C
10 % - 80 % Relative Humidity 10 % - 80 %
0 V, 10 mV - 1000 V DC Voltage 0V - 1000 V
0 A - 10 A DC Current 0 A - 10 A
0 A - 1000 A Current Clamps 0 A - 1000A

mg-sensor is your partner for reliable sensor services:

 

Calibration

  • Fast and high-quality calibration services
  • Competent consulting
  • Accredited calibration laboratory according to DIN EN ISO/IEC 17025
  • Accreditation for seat belt load cells according to ISO 17025 / ISO/TS 17242
  • Accreditation for ATD load cells
  • 14 different measurands
  • 13 calibration systems
  • Calibration of all brands (on request)
  • 27,000 axis per year
  • Calibration laboratory on over 250 m²

 

Service and Information Request

If you'd like to know more about our services or have a service request, please fill out the form below.